BMYSM - 64335, POLY-EM 40 EMULSION
- MSDS: BMYSM
- Manufacturer: ROHM AND HAAS CO
- Product Name: 64335, POLY-EM 40 EMULSION
- National Stock Number: 8030-00N029140
Product Identification
Product ID:64335, POLY-EM 40 EMULSION
MSDS Date:04/26/1988
FSC:8030
NIIN:00N029140
MSDS Number: BMYSM
Responsible Party
PHILADELPHIA, PA 19105
US
Emergency Phone: 215-592-3000;800-424-9300(CHEMTREC)
Info Phone: 215-592-3000
Cage: 77902
Contractor
Telephone: 215-592-2521/215-592-3000
Cage: 77902
Ingredients
POLYMER; (POLYETHYLENE POLYMER)
Fraction By Weight: 39-41%
FORMALDEHYDE (SARA III)
CAS: 50-00-0
RTECS: LP8925000
Fraction By Weight: <0.07%
OSHA PEL SEE 1910.1048
ACGIH TLV: C 0.3 PPM; A2; 9293
EPA Report Quantity: 100 LBS
DOT Report Quantity: 100 LBS
0C, 32F.
CAS: 7732-18-5
RTECS: ZC0110000
Fraction By Weight: 59-61%
Hazards
LD50 LC50 Mixture:NONE SPECIFIED BY MANUFACTURER.
Routes of Entry: Inhalation:YES Skin:NO Ingestion:YES
Reports of Carcinogenicity:NTP:NO IARC:NO OSHA:NO
Health Hazards Acute and Chronic:INHAL: VAPOR OR MIST CAN CAUSE
HEADACHE, NAUSEA, AND IRRITATION OF THE NOSE, THROAT AND LUNGS.
SKIN: IRRITATING TO SKIN UPON REPEATED OR PROLONGED CONTACT. EYE:
MODERATELY IRRITATING TO EYES.
Explanation of Carcinogenicity:NOT RELEVANT
Effects of Overexposure:SEE HEALTH HAZARDS.
Medical Cond Aggravated by Exposure:NONE SPECIFIED BY MANUFACTURER.
First Aid
First Aid:INHAL: MOVE SUBJECT TO FRESH AIR. EYE: FLUSH WITH WATER FOR
AT LEAST 15 MIN. SEE A PHYSICIAN IF IRRITATION PERSISTS. SKIN: WASH
AFFECTED SKIN AREAS WITH SOAP AND WATER. INGEST: DILUTE BY GIVING 2
GLAS SES OF WATER TO DRINK. SEE A PHYSICIAN.NEVER GIVE ANYTHING BY
MOUTH TO AN UNCONSCIOUS PERSON.
Fire Fighting
Flash Point:NON-COMBUSTIBLE
Extinguishing Media:NOT APPLICABLE. MEDIA SUITABLE FOR SURROUNDING FIRE
.
Fire Fighting Procedures:WEAR NIOSH/MSHA APPROVED SCBA AND FULL
PROTECTIVE EQUIPMENT .
Unusual Fire/Explosion Hazard:MATERIAL CAN SPLATTER ABOVE 100C/212F.
POLYMER FILM CAN BURN.
Accidental Release
Spill Release Procedures:KEEP SPECTATORS AWAY. FLOOR MAY BE SLIPPERY;
USE CARE TO AVOID FALLING. DIKE & CNTN SPILL W/INERT MATL(E.G, SAND
EARTH). TRANSFER LIQ TO CNTNRS FOR RECOVERY/DISP & SOLID DIKING
MATL TO SEPARATE CNTNRS FOR DISP. KEEP SPILLS/CLEANING
RUNOFFS(SUPP DATA)
Neutralizing Agent:NONE SPECIFIED BY MANUFACTURER.
Handling
Handling and Storage Precautions:KEEP FROM FREEZING--PRODUCT MAY
COAGULATE. STORAGE TEMP: MAX 49C/120F, MIN 1C/34F.
Other Precautions:NONE SPECIFIED BY MANUFACTURER.
Exposure Controls
Respiratory Protection:WEAR SUITABLE NIOSH/MSHA APPROVED RESPIRATOR
WHERE EXPOSURE LIMITS ARE EXCEEDED.
Ventilation:MECHANICAL LOCAL EXHAUST VENTILATION AT POINT OF
CONTAMINANT RELEASE.
Protective Gloves:IMPERVIOUS.
Eye Protection:CHEMICAL WORKERS GOGGLES .
Other Protective Equipment:NONE SPECIFIED BY MANUFACTURER.
Work Hygienic Practices:NONE SPECIFIED BY MANUFACTURER.
Supplemental Safety and Health
% VOL: 59-61 (WT). SPILL PROC: OUT OF MUNICIPAL SEWERS AND OPEN BODIES
OF WATER.
Chemical Properties
HCC:N1
Boiling Pt:B.P. Text:ING 3
Melt/Freeze Pt:M.P/F.P Text:ING 3
Vapor Pres:17 @ 20C
Vapor Density:< 1, H2O
Spec Gravity:0.97 (H2O=1)
pH:7-9.5
Evaporation Rate & Reference:< 1, WATER
Solubility in Water:DILUTABLE
Appearance and Odor:MILKY-WHITE LIQUID; ODORLESS
Percent Volatiles by Volume:SUPDAT
Stability
Stability Indicator/Materials to Avoid:YES
Hazardous Decomposition Products:NONE KNOWN
Disposal
Waste Disposal Methods:INCINERATE THE SOLIDS AND THE CONTAMINATED
DIKING MATERIAL AT A PERMITTED FACILITY ACCORDING TO LOCAL, STATE,
AND FEDERAL REGULATIONS.
Disclaimer (provided with this information by the compiling agencies):
This information is formulated for use by elements of the Department
of Defense. The United States of America in no manner whatsoever,
expressly or implied, warrants this information to be accurate and
disclaims all liability for its use. Any person utilizing this
document should seek competent professional advice to verify and
assume responsibility for the suitability of this information to their
particular situation.